base.h File Reference

#include <chrono>
#include <ratio>
#include <type_traits>
#include <cstdint>
#include <cmath>
#include <limits>

Go to the source code of this file.

Classes
struct	units::traits::is_ratio< T >
	Trait that tests whether a type represents a std::ratio. More...
struct	units::traits::is_base_unit< T >
	Trait which tests if a class is a base_unit type. More...
struct	units::traits::is_unit< T >
	Traits which tests if a class is a unit More...
struct	units::base_unit< Meter, Kilogram, Second, Radian, Ampere, Kelvin, Mole, Candela, Byte >
	Class representing SI base unit types. More...
struct	units::unit< Conversion, BaseUnit, PiExponent, Translation >
	Type representing an arbitrary unit. More...
struct	units::traits::is_convertible_unit< U1, U2 >
	Trait which checks whether two units can be converted to each other. More...
struct	units::traits::is_nonlinear_scale< T, Ret >
	Trait which tests that class T meets the requirements for a non-linear scale. More...
struct	units::traits::is_convertible_unit_t< U1, U2 >
	Trait which tests whether two container types derived from unit_t are convertible to each other. More...
struct	units::traits::is_unit_t< T >
	Traits which tests if a class is a unit More...
class	units::unit_t< Units, T, NonLinearScale >
	Container for values which represent quantities of a given unit. More...
struct	units::traits::has_linear_scale< T >
	Trait which tests whether a type is inherited from a linear scale. More...
struct	units::traits::has_decibel_scale< T >
	Trait which tests whether a type is inherited from a decibel scale. More...
struct	units::traits::is_same_scale< T1, T2 >
	Trait which tests whether two types has the same non-linear scale. More...
struct	units::linear_scale< T >
	unit_t scale which is linear More...
struct	units::decibel_scale< T >
	unit_t scale for representing decibel values. More...
struct	units::unit_value_t< Units, Num, Denom >
	Stores a rational unit value as a compile-time constant. More...
struct	units::traits::is_unit_value_t< T, Units >
	Trait which tests whether a type is a unit_value_t representing the given unit type. More...
struct	units::traits::is_unit_value_t_category< Category, T >
	Trait which tests whether type T is a unit_value_t with a unit type in the given category. More...
struct	units::unit_value_add< U1, U2 >
	adds two unit_value_t types at compile-time More...
struct	units::unit_value_subtract< U1, U2 >
	subtracts two unit_value_t types at compile-time More...
struct	units::unit_value_multiply< U1, U2 >
	multiplies two unit_value_t types at compile-time More...
struct	units::unit_value_divide< U1, U2 >
	divides two unit_value_t types at compile-time More...
struct	units::unit_value_power< U1, power >
	raises unit_value_to a power at compile-time More...
struct	units::unit_value_sqrt< U1, Eps >
	calculates square root of unit_value_t at compile-time More...

Namespaces
namespace	units
	Unit Conversion Library namespace.
namespace	units::detail
namespace	units::traits
	namespace representing type traits which can access the properties of types provided by the units library.
namespace	units::category
	namespace representing the implemented base and derived unit types.
namespace	units::dimensionless
	namespace for unit types and containers for units that have no dimension (scalar units)
namespace	units::math
	namespace for unit-enabled versions of the <cmath> library
namespace	units::literals

Macros
#define	UNIT_HAS_LITERAL_SUPPORT
#define	UNIT_LIB_DEFAULT_TYPE   double
#define	UNIT_ADD_UNIT_TAGS(namespaceName, nameSingular, namePlural, abbreviation, ...)
	Helper macro for generating the boiler-plate code generating the tags of a new unit. More...
#define	UNIT_ADD_UNIT_DEFINITION(namespaceName, nameSingular)
	Macro for generating the boiler-plate code for the unit_t type definition. More...
#define	UNIT_ADD_CUSTOM_TYPE_UNIT_DEFINITION(namespaceName, nameSingular, underlyingType)
	Macro for generating the boiler-plate code for a unit_t type definition with a non-default underlying type. More...
#define	UNIT_ADD_NAME(namespaceName, nameSingular, abbrev)
	Macro for generating constexpr names/abbreviations for units. More...
#define	UNIT_ADD_LITERALS(namespaceName, nameSingular, abbreviation)
	Macro for generating user-defined literals for units. More...
#define	UNIT_ADD(namespaceName, nameSingular, namePlural, abbreviation, ...)
	Macro for generating the boiler-plate code needed for a new unit. More...
#define	UNIT_ADD_WITH_CUSTOM_TYPE(namespaceName, nameSingular, namePlural, abbreviation, underlyingType, ...)
	Macro for generating the boiler-plate code needed for a new unit with a non-default underlying type. More...
#define	UNIT_ADD_DECIBEL(namespaceName, nameSingular, abbreviation)
	Macro to create decibel container and literals for an existing unit type. More...
#define	UNIT_ADD_CATEGORY_TRAIT_DETAIL(unitCategory)
#define	UNIT_ADD_IS_UNIT_CATEGORY_TRAIT(unitCategory)
#define	UNIT_ADD_CATEGORY_TRAIT(unitCategory)
	Macro to create the is_category_unit type trait. More...
#define	UNIT_ADD_WITH_METRIC_PREFIXES(namespaceName, nameSingular, namePlural, abbreviation, ...)
	Macro for generating the boiler-plate code needed for a new unit, including its metric prefixes from femto to peta. More...
#define	UNIT_ADD_WITH_METRIC_AND_BINARY_PREFIXES(namespaceName, nameSingular, namePlural, abbreviation, ...)
	Macro for generating the boiler-plate code needed for a new unit, including its metric prefixes from femto to peta, and binary prefixes from kibi to exbi. More...

Typedefs
typedef base_unit	units::category::scalar_unit
	Represents a quantity with no dimension. More...
typedef base_unit	units::category::dimensionless_unit
	Represents a quantity with no dimension. More...
typedef base_unit< detail::meter_ratio< 1 > >	units::category::length_unit
	Represents an SI base unit of length. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 1 > >	units::category::mass_unit
	Represents an SI base unit of mass. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::time_unit
	Represents an SI base unit of time. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::angle_unit
	Represents an SI base unit of angle. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::current_unit
	Represents an SI base unit of current. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::temperature_unit
	Represents an SI base unit of temperature. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::substance_unit
	Represents an SI base unit of amount of substance. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::luminous_intensity_unit
	Represents an SI base unit of luminous intensity. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 2 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 > >	units::category::solid_angle_unit
	Represents an SI derived unit of solid angle. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio<-1 > >	units::category::frequency_unit
	Represents an SI derived unit of frequency. More...
typedef base_unit< detail::meter_ratio< 1 >, std::ratio< 0 >, std::ratio<-1 > >	units::category::velocity_unit
	Represents an SI derived unit of velocity. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio<-1 >, std::ratio< 1 > >	units::category::angular_velocity_unit
	Represents an SI derived unit of angular velocity. More...
typedef base_unit< detail::meter_ratio< 1 >, std::ratio< 0 >, std::ratio<-2 > >	units::category::acceleration_unit
	Represents an SI derived unit of acceleration. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio<-2 >, std::ratio< 1 > >	units::category::angular_acceleration_unit
	Represents an SI derived unit of angular acceleration. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio<-3 >, std::ratio< 1 > >	units::category::angular_jerk_unit
	Represents an SI derived unit of angular jerk. More...
typedef base_unit< detail::meter_ratio< 1 >, std::ratio< 1 >, std::ratio<-2 > >	units::category::force_unit
	Represents an SI derived unit of force. More...
typedef base_unit< detail::meter_ratio<-1 >, std::ratio< 1 >, std::ratio<-2 > >	units::category::pressure_unit
	Represents an SI derived unit of pressure. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 1 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::charge_unit
	Represents an SI derived unit of charge. More...
typedef base_unit< detail::meter_ratio< 2 >, std::ratio< 1 >, std::ratio<-2 > >	units::category::energy_unit
	Represents an SI derived unit of energy. More...
typedef base_unit< detail::meter_ratio< 2 >, std::ratio< 1 >, std::ratio<-3 > >	units::category::power_unit
	Represents an SI derived unit of power. More...
typedef base_unit< detail::meter_ratio< 2 >, std::ratio< 1 >, std::ratio<-3 >, std::ratio< 0 >, std::ratio<-1 > >	units::category::voltage_unit
	Represents an SI derived unit of voltage. More...
typedef base_unit< detail::meter_ratio<-2 >, std::ratio<-1 >, std::ratio< 4 >, std::ratio< 0 >, std::ratio< 2 > >	units::category::capacitance_unit
	Represents an SI derived unit of capacitance. More...
typedef base_unit< detail::meter_ratio< 2 >, std::ratio< 1 >, std::ratio<-3 >, std::ratio< 0 >, std::ratio<-2 > >	units::category::impedance_unit
	Represents an SI derived unit of impedance. More...
typedef base_unit< detail::meter_ratio<-2 >, std::ratio<-1 >, std::ratio< 3 >, std::ratio< 0 >, std::ratio< 2 > >	units::category::conductance_unit
	Represents an SI derived unit of conductance. More...
typedef base_unit< detail::meter_ratio< 2 >, std::ratio< 1 >, std::ratio<-2 >, std::ratio< 0 >, std::ratio<-1 > >	units::category::magnetic_flux_unit
	Represents an SI derived unit of magnetic flux. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 1 >, std::ratio<-2 >, std::ratio< 0 >, std::ratio<-1 > >	units::category::magnetic_field_strength_unit
	Represents an SI derived unit of magnetic field strength. More...
typedef base_unit< detail::meter_ratio< 2 >, std::ratio< 1 >, std::ratio<-2 >, std::ratio< 0 >, std::ratio<-2 > >	units::category::inductance_unit
	Represents an SI derived unit of inductance. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 2 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::luminous_flux_unit
	Represents an SI derived unit of luminous flux. More...
typedef base_unit< detail::meter_ratio<-2 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 2 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::illuminance_unit
	Represents an SI derived unit of illuminance. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio<-1 > >	units::category::radioactivity_unit
	Represents an SI derived unit of radioactivity. More...
typedef base_unit< detail::meter_ratio< 2 >, std::ratio< 1 >, std::ratio<-2 > >	units::category::torque_unit
	Represents an SI derived unit of torque. More...
typedef base_unit< detail::meter_ratio< 2 > >	units::category::area_unit
	Represents an SI derived unit of area. More...
typedef base_unit< detail::meter_ratio< 3 > >	units::category::volume_unit
	Represents an SI derived unit of volume. More...
typedef base_unit< detail::meter_ratio<-3 >, std::ratio< 1 > >	units::category::density_unit
	Represents an SI derived unit of density. More...
typedef base_unit	units::category::concentration_unit
	Represents a unit of concentration. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::data_unit
	Represents a unit of data size. More...
typedef base_unit< detail::meter_ratio< 0 >, std::ratio< 0 >, std::ratio<-1 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 0 >, std::ratio< 1 > >	units::category::data_transfer_rate_unit
	Represents a unit of data transfer rate. More...
template<class U >
using	units::traits::base_unit_of = typename units::detail::base_unit_of_impl< U >::type
	Trait which returns the base_unit type that a unit is originally derived from. More...
template<class U >
using	units::inverse = typename units::detail::inverse_impl< U >::type
	represents the inverse unit type of class U. More...
template<class U >
using	units::squared = typename units::detail::squared_impl< U >::type
	represents the unit type of class U squared More...
template<class U >
using	units::cubed = typename units::detail::cubed_impl< U >::type
	represents the type of class U cubed. More...
template<typename Ratio , std::intmax_t Eps = 10000000000>
using	units::ratio_sqrt = typename units::detail::Sqrt< Ratio, std::ratio< 1, Eps > >::type
	Calculate square root of a ratio at compile-time. More...
template<class U , std::intmax_t Eps = 10000000000>
using	units::square_root = typename units::detail::sqrt_impl< U, Eps >::type
	represents the square root of type class U. More...
template<class U , class... Us>
using	units::compound_unit = typename units::detail::compound_impl< U, Us... >::type
	Represents a unit type made up from other units. More...
typedef unit< std::ratio< 1 >, units::category::scalar_unit >	units::dimensionless::scalar
typedef unit< std::ratio< 1 >, units::category::dimensionless_unit >	units::dimensionless::dimensionless
typedef unit_t< scalar >	units::dimensionless::scalar_t
typedef scalar_t	units::dimensionless::dimensionless_t
typedef unit_t< scalar, UNIT_LIB_DEFAULT_TYPE, decibel_scale >	units::dimensionless::dB_t
typedef dB_t	units::dimensionless::dBi_t
template<class U >
using	units::atto = typename units::detail::prefix< std::atto, U >::type
	Represents the type of class U with the metric 'atto' prefix appended. More...
template<class U >
using	units::femto = typename units::detail::prefix< std::femto, U >::type
	Represents the type of class U with the metric 'femto' prefix appended. More...
template<class U >
using	units::pico = typename units::detail::prefix< std::pico, U >::type
	Represents the type of class U with the metric 'pico' prefix appended. More...
template<class U >
using	units::nano = typename units::detail::prefix< std::nano, U >::type
	Represents the type of class U with the metric 'nano' prefix appended. More...
template<class U >
using	units::micro = typename units::detail::prefix< std::micro, U >::type
	Represents the type of class U with the metric 'micro' prefix appended. More...
template<class U >
using	units::milli = typename units::detail::prefix< std::milli, U >::type
	Represents the type of class U with the metric 'milli' prefix appended. More...
template<class U >
using	units::centi = typename units::detail::prefix< std::centi, U >::type
	Represents the type of class U with the metric 'centi' prefix appended. More...
template<class U >
using	units::deci = typename units::detail::prefix< std::deci, U >::type
	Represents the type of class U with the metric 'deci' prefix appended. More...
template<class U >
using	units::deca = typename units::detail::prefix< std::deca, U >::type
	Represents the type of class U with the metric 'deca' prefix appended. More...
template<class U >
using	units::hecto = typename units::detail::prefix< std::hecto, U >::type
	Represents the type of class U with the metric 'hecto' prefix appended. More...
template<class U >
using	units::kilo = typename units::detail::prefix< std::kilo, U >::type
	Represents the type of class U with the metric 'kilo' prefix appended. More...
template<class U >
using	units::mega = typename units::detail::prefix< std::mega, U >::type
	Represents the type of class U with the metric 'mega' prefix appended. More...
template<class U >
using	units::giga = typename units::detail::prefix< std::giga, U >::type
	Represents the type of class U with the metric 'giga' prefix appended. More...
template<class U >
using	units::tera = typename units::detail::prefix< std::tera, U >::type
	Represents the type of class U with the metric 'tera' prefix appended. More...
template<class U >
using	units::peta = typename units::detail::prefix< std::peta, U >::type
	Represents the type of class U with the metric 'peta' prefix appended. More...
template<class U >
using	units::exa = typename units::detail::prefix< std::exa, U >::type
	Represents the type of class U with the metric 'exa' prefix appended. More...
template<class U >
using	units::kibi = typename units::detail::prefix< std::ratio< 1024 >, U >::type
	Represents the type of class U with the binary 'kibi' prefix appended. More...
template<class U >
using	units::mebi = typename units::detail::prefix< std::ratio< 1048576 >, U >::type
	Represents the type of class U with the binary 'mibi' prefix appended. More...
template<class U >
using	units::gibi = typename units::detail::prefix< std::ratio< 1073741824 >, U >::type
	Represents the type of class U with the binary 'gibi' prefix appended. More...
template<class U >
using	units::tebi = typename units::detail::prefix< std::ratio< 1099511627776 >, U >::type
	Represents the type of class U with the binary 'tebi' prefix appended. More...
template<class U >
using	units::pebi = typename units::detail::prefix< std::ratio< 1125899906842624 >, U >::type
	Represents the type of class U with the binary 'pebi' prefix appended. More...
template<class U >
using	units::exbi = typename units::detail::prefix< std::ratio< 1152921504606846976 >, U >::type
	Represents the type of class U with the binary 'exbi' prefix appended. More...

Functions
template<typename T >
std::string	units::detail::to_string (const T &t)
template<typename T >
constexpr const char *	units::name (const T &)
template<typename T >
constexpr const char *	units::abbreviation (const T &)
template<class UnitFrom , class UnitTo , typename T = UNIT_LIB_DEFAULT_TYPE>
static constexpr T	units::convert (const T &value) noexcept
	converts a value from one type to another. More...
template<class UnitType , typename T , class = std::enable_if_t<std::is_arithmetic<T>::value>>
constexpr UnitType	units::make_unit (const T value) noexcept
	Constructs a unit container from an arithmetic type. More...
template<class Units , typename T , template< typename > class NonLinearScale, typename RhsType >
unit_t< Units, T, NonLinearScale > &	units::operator+= (unit_t< Units, T, NonLinearScale > &lhs, const RhsType &rhs) noexcept
template<class Units , typename T , template< typename > class NonLinearScale, typename RhsType >
unit_t< Units, T, NonLinearScale > &	units::operator-= (unit_t< Units, T, NonLinearScale > &lhs, const RhsType &rhs) noexcept
template<class Units , typename T , template< typename > class NonLinearScale, typename RhsType >
unit_t< Units, T, NonLinearScale > &	units::operator*= (unit_t< Units, T, NonLinearScale > &lhs, const RhsType &rhs) noexcept
template<class Units , typename T , template< typename > class NonLinearScale, typename RhsType >
unit_t< Units, T, NonLinearScale > &	units::operator/= (unit_t< Units, T, NonLinearScale > &lhs, const RhsType &rhs) noexcept
template<class Units , typename T , template< typename > class NonLinearScale>
constexpr unit_t< Units, T, NonLinearScale >	units::operator+ (const unit_t< Units, T, NonLinearScale > &u) noexcept
template<class Units , typename T , template< typename > class NonLinearScale>
unit_t< Units, T, NonLinearScale > &	units::operator++ (unit_t< Units, T, NonLinearScale > &u) noexcept
template<class Units , typename T , template< typename > class NonLinearScale>
unit_t< Units, T, NonLinearScale >	units::operator++ (unit_t< Units, T, NonLinearScale > &u, int) noexcept
template<class Units , typename T , template< typename > class NonLinearScale>
constexpr unit_t< Units, T, NonLinearScale >	units::operator- (const unit_t< Units, T, NonLinearScale > &u) noexcept
template<class Units , typename T , template< typename > class NonLinearScale>
unit_t< Units, T, NonLinearScale > &	units::operator-- (unit_t< Units, T, NonLinearScale > &u) noexcept
template<class Units , typename T , template< typename > class NonLinearScale>
unit_t< Units, T, NonLinearScale >	units::operator-- (unit_t< Units, T, NonLinearScale > &u, int) noexcept
template<typename T , typename Units , class = std::enable_if_t<std::is_arithmetic<T>::value && traits::is_unit_t<Units>::value>>
constexpr T	units::unit_cast (const Units &value) noexcept
	Casts a unit container to an arithmetic type. More...
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t<!traits::is_same_scale< UnitTypeLhs, UnitTypeRhs >::value, int > = 0>
constexpr int	units::operator+ (const UnitTypeLhs &, const UnitTypeRhs &) noexcept
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t< traits::has_linear_scale< UnitTypeLhs, UnitTypeRhs >::value, int > = 0>
constexpr UnitTypeLhs	units::operator+ (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept
	Addition operator for unit_t types with a linear_scale. More...
template<typename T , std::enable_if_t< std::is_arithmetic< T >::value, int > = 0>
constexpr dimensionless::scalar_t	units::operator+ (const dimensionless::scalar_t &lhs, T rhs) noexcept
	Addition operator for scalar unit_t types with a linear_scale. Scalar types can be implicitly converted to built-in types. More...
template<typename T , std::enable_if_t< std::is_arithmetic< T >::value, int > = 0>
constexpr dimensionless::scalar_t	units::operator+ (T lhs, const dimensionless::scalar_t &rhs) noexcept
	Addition operator for scalar unit_t types with a linear_scale. Scalar types can be implicitly converted to built-in types. More...
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t< traits::has_linear_scale< UnitTypeLhs, UnitTypeRhs >::value, int > = 0>
constexpr UnitTypeLhs	units::operator- (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept
	Subtraction operator for unit_t types with a linear_scale. More...
template<typename T , std::enable_if_t< std::is_arithmetic< T >::value, int > = 0>
constexpr dimensionless::scalar_t	units::operator- (const dimensionless::scalar_t &lhs, T rhs) noexcept
	Subtraction operator for scalar unit_t types with a linear_scale. Scalar types can be implicitly converted to built-in types. More...
template<typename T , std::enable_if_t< std::is_arithmetic< T >::value, int > = 0>
constexpr dimensionless::scalar_t	units::operator- (T lhs, const dimensionless::scalar_t &rhs) noexcept
	Subtraction operator for scalar unit_t types with a linear_scale. Scalar types can be implicitly converted to built-in types. More...
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t< traits::is_convertible_unit_t< UnitTypeLhs, UnitTypeRhs >::value &&traits::has_linear_scale< UnitTypeLhs, UnitTypeRhs >::value, int > = 0>
constexpr auto	units::operator* (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept -> unit_t< compound_unit< squared< typename units::traits::unit_t_traits< UnitTypeLhs >::unit_type > > >
	Multiplication type for convertible unit_t types with a linear scale. More...
template<class UnitTypeLhs , typename UnitTypeRhs , std::enable_if_t< traits::has_linear_scale< UnitTypeLhs, UnitTypeRhs >::value &&!traits::is_dimensionless_unit< UnitTypeLhs >::value &&traits::is_dimensionless_unit< UnitTypeRhs >::value, int > = 0>
constexpr UnitTypeLhs	units::operator* (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept
	Multiplication by a dimensionless unit for unit_t types with a linear scale. More...
template<class UnitTypeLhs , typename UnitTypeRhs , std::enable_if_t< traits::has_linear_scale< UnitTypeLhs, UnitTypeRhs >::value &&traits::is_dimensionless_unit< UnitTypeLhs >::value &&!traits::is_dimensionless_unit< UnitTypeRhs >::value, int > = 0>
constexpr UnitTypeRhs	units::operator* (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept
	Multiplication by a dimensionless unit for unit_t types with a linear scale. More...
template<class UnitTypeLhs , typename T , std::enable_if_t< std::is_arithmetic< T >::value &&traits::has_linear_scale< UnitTypeLhs >::value, int > = 0>
constexpr UnitTypeLhs	units::operator* (const UnitTypeLhs &lhs, T rhs) noexcept
	Multiplication by a scalar for unit_t types with a linear scale. More...
template<class UnitTypeRhs , typename T , std::enable_if_t< std::is_arithmetic< T >::value &&traits::has_linear_scale< UnitTypeRhs >::value, int > = 0>
constexpr UnitTypeRhs	units::operator* (T lhs, const UnitTypeRhs &rhs) noexcept
	Multiplication by a scalar for unit_t types with a linear scale. More...
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t< traits::is_convertible_unit_t< UnitTypeLhs, UnitTypeRhs >::value &&traits::has_linear_scale< UnitTypeLhs, UnitTypeRhs >::value, int > = 0>
constexpr dimensionless::scalar_t	units::operator/ (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept
	Division for convertible unit_t types with a linear scale. More...
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t<!traits::is_convertible_unit_t< UnitTypeLhs, UnitTypeRhs >::value &&traits::has_linear_scale< UnitTypeLhs, UnitTypeRhs >::value &&!traits::is_dimensionless_unit< UnitTypeLhs >::value &&!traits::is_dimensionless_unit< UnitTypeRhs >::value, int > = 0>
constexpr auto	units::operator/ (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept -> unit_t< compound_unit< typename units::traits::unit_t_traits< UnitTypeLhs >::unit_type, inverse< typename units::traits::unit_t_traits< UnitTypeRhs >::unit_type > > >
	Division for non-convertible unit_t types with a linear scale. More...
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t< traits::has_linear_scale< UnitTypeLhs, UnitTypeRhs >::value &&!traits::is_dimensionless_unit< UnitTypeLhs >::value &&traits::is_dimensionless_unit< UnitTypeRhs >::value, int > = 0>
constexpr UnitTypeLhs	units::operator/ (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept
	Division by a dimensionless unit for unit_t types with a linear scale. More...
template<class UnitTypeLhs , typename T , std::enable_if_t< std::is_arithmetic< T >::value &&traits::has_linear_scale< UnitTypeLhs >::value, int > = 0>
constexpr UnitTypeLhs	units::operator/ (const UnitTypeLhs &lhs, T rhs) noexcept
	Division by a scalar for unit_t types with a linear scale. More...
template<class UnitTypeRhs , typename T , std::enable_if_t< std::is_arithmetic< T >::value &&traits::has_linear_scale< UnitTypeRhs >::value, int > = 0>
constexpr auto	units::operator/ (T lhs, const UnitTypeRhs &rhs) noexcept -> unit_t< inverse< typename units::traits::unit_t_traits< UnitTypeRhs >::unit_type > >
	Division of a scalar by a unit_t type with a linear scale. More...
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator== (const UNIT_LIB_DEFAULT_TYPE lhs, const Units &rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator== (const Units &lhs, const UNIT_LIB_DEFAULT_TYPE rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator!= (const UNIT_LIB_DEFAULT_TYPE lhs, const Units &rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator!= (const Units &lhs, const UNIT_LIB_DEFAULT_TYPE rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator>= (const UNIT_LIB_DEFAULT_TYPE lhs, const Units &rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator>= (const Units &lhs, const UNIT_LIB_DEFAULT_TYPE rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator> (const UNIT_LIB_DEFAULT_TYPE lhs, const Units &rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator> (const Units &lhs, const UNIT_LIB_DEFAULT_TYPE rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator<= (const UNIT_LIB_DEFAULT_TYPE lhs, const Units &rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator<= (const Units &lhs, const UNIT_LIB_DEFAULT_TYPE rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator< (const UNIT_LIB_DEFAULT_TYPE lhs, const Units &rhs) noexcept
template<typename Units , class = std::enable_if_t<units::traits::is_dimensionless_unit<Units>::value>>
constexpr bool	units::operator< (const Units &lhs, const UNIT_LIB_DEFAULT_TYPE rhs) noexcept
template<int power, class UnitType , class = typename std::enable_if<traits::has_linear_scale<UnitType>::value, int>>
auto	units::math::pow (const UnitType &value) noexcept -> unit_t< typename units::detail::power_of_unit< power, typename units::traits::unit_t_traits< UnitType >::unit_type >::type, typename units::traits::unit_t_traits< UnitType >::underlying_type, linear_scale >
	computes the value of value raised to the power More...
template<int power, class UnitType , class = typename std::enable_if<traits::has_linear_scale<UnitType>::value, int>>
constexpr auto	units::math::cpow (const UnitType &value) noexcept -> unit_t< typename units::detail::power_of_unit< power, typename units::traits::unit_t_traits< UnitType >::unit_type >::type, typename units::traits::unit_t_traits< UnitType >::underlying_type, linear_scale >
	computes the value of value raised to the power as a constexpr More...
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t< traits::has_decibel_scale< UnitTypeLhs, UnitTypeRhs >::value, int > = 0>
constexpr auto	units::operator+ (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept -> unit_t< compound_unit< squared< typename units::traits::unit_t_traits< UnitTypeLhs >::unit_type > >, typename units::traits::unit_t_traits< UnitTypeLhs >::underlying_type, decibel_scale >
	Addition for convertible unit_t types with a decibel_scale. More...
template<class UnitTypeLhs , std::enable_if_t< traits::has_decibel_scale< UnitTypeLhs >::value &&!traits::is_dimensionless_unit< UnitTypeLhs >::value, int > = 0>
constexpr UnitTypeLhs	units::operator+ (const UnitTypeLhs &lhs, const dimensionless::dB_t &rhs) noexcept
	Addition between unit_t types with a decibel_scale and dimensionless dB units. More...
template<class UnitTypeRhs , std::enable_if_t< traits::has_decibel_scale< UnitTypeRhs >::value &&!traits::is_dimensionless_unit< UnitTypeRhs >::value, int > = 0>
constexpr UnitTypeRhs	units::operator+ (const dimensionless::dB_t &lhs, const UnitTypeRhs &rhs) noexcept
	Addition between unit_t types with a decibel_scale and dimensionless dB units. More...
template<class UnitTypeLhs , class UnitTypeRhs , std::enable_if_t< traits::has_decibel_scale< UnitTypeLhs, UnitTypeRhs >::value, int > = 0>
constexpr auto	units::operator- (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs) noexcept -> unit_t< compound_unit< typename units::traits::unit_t_traits< UnitTypeLhs >::unit_type, inverse< typename units::traits::unit_t_traits< UnitTypeRhs >::unit_type > >, typename units::traits::unit_t_traits< UnitTypeLhs >::underlying_type, decibel_scale >
	Subtraction for convertible unit_t types with a decibel_scale. More...
template<class UnitTypeLhs , std::enable_if_t< traits::has_decibel_scale< UnitTypeLhs >::value &&!traits::is_dimensionless_unit< UnitTypeLhs >::value, int > = 0>
constexpr UnitTypeLhs	units::operator- (const UnitTypeLhs &lhs, const dimensionless::dB_t &rhs) noexcept
	Subtraction between unit_t types with a decibel_scale and dimensionless dB units. More...
template<class UnitTypeRhs , std::enable_if_t< traits::has_decibel_scale< UnitTypeRhs >::value &&!traits::is_dimensionless_unit< UnitTypeRhs >::value, int > = 0>
constexpr auto	units::operator- (const dimensionless::dB_t &lhs, const UnitTypeRhs &rhs) noexcept -> unit_t< inverse< typename units::traits::unit_t_traits< UnitTypeRhs >::unit_type >, typename units::traits::unit_t_traits< UnitTypeRhs >::underlying_type, decibel_scale >
	Subtraction between unit_t types with a decibel_scale and dimensionless dB units. More...
template<class UnitTypeLhs , class UnitTypeRhs >
UnitTypeLhs()	units::math::min (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs)
template<class UnitTypeLhs , class UnitTypeRhs >
UnitTypeLhs()	units::math::max (const UnitTypeLhs &lhs, const UnitTypeRhs &rhs)

Variables
template<class T >
constexpr bool	units::traits::is_ratio_v = is_ratio<T>::value
template<class T >
constexpr bool	units::traits::is_unit_v = is_unit<T>::value
template<class U1 , class U2 >
constexpr bool	units::traits::is_convertible_unit_v = is_convertible_unit<U1, U2>::value
template<class T >
constexpr bool	units::traits::is_unit_t_v = is_unit_t<T>::value
template<typename... T>
constexpr bool	units::traits::has_linear_scale_v = has_linear_scale<T...>::value
template<typename... T>
constexpr bool	units::traits::has_decibel_scale_v = has_decibel_scale<T...>::value
template<typename T1 , typename T2 >
constexpr bool	units::traits::is_same_scale_v = is_same_scale<T1, T2>::value
template<typename T , typename Units = typename traits::unit_value_t_traits<T>::unit_type>
constexpr bool	units::traits::is_unit_value_t_v = is_unit_value_t<T, Units>::value
template<typename Category , typename T >
constexpr bool	units::traits::is_unit_value_t_category_v = is_unit_value_t_category<Category, T>::value

Macro Definition Documentation

UNIT_ADD

#define UNIT_ADD	(		namespaceName,
			nameSingular,
			namePlural,
			abbreviation,
			...
	)

Value:

    UNIT_ADD_UNIT_TAGS(namespaceName,nameSingular, namePlural, abbreviation, __VA_ARGS__)\
    UNIT_ADD_UNIT_DEFINITION(namespaceName,nameSingular)\
    UNIT_ADD_NAME(namespaceName,nameSingular, abbreviation)\
    UNIT_ADD_IO(namespaceName,nameSingular, abbreviation)\
    UNIT_ADD_LITERALS(namespaceName,nameSingular, abbreviation)

Macro for generating the boiler-plate code needed for a new unit.

The macro generates singular, plural, and abbreviated forms of the unit definition (e.g. meter, meters, and m), as well as the appropriately named unit container (e.g. meter_t). A literal suffix is created using the abbreviation (e.g. 10.0_m). It also defines a class-specific cout function which prints both the value and abbreviation of the unit when invoked.

Parameters

namespaceName	namespace in which the new units will be encapsulated. All literal values are placed in the units::literals namespace.
nameSingular	singular version of the unit name, e.g. 'meter'
namePlural	- plural version of the unit name, e.g. 'meters'
abbreviation	- abbreviated unit name, e.g. 'm'
definition	- the variadic parameter is used for the definition of the unit (e.g. unit<std::ratio<1>, units::category::length_unit>)

Note

a variadic template is used for the definition to allow templates with commas to be easily expanded. All the variadic 'arguments' should together comprise the unit definition.

UNIT_ADD_CATEGORY_TRAIT

#define UNIT_ADD_CATEGORY_TRAIT

(

unitCategory

)

Value:

    UNIT_ADD_CATEGORY_TRAIT_DETAIL(unitCategory)\
    /** @ingroup    TypeTraits*/\
    /** @brief      Trait which tests whether a type represents a unit of unitCategory*/\
    /** @details    Inherits from `std::true_type` or `std::false_type`. Use `is_ ## unitCategory ## _unit<T>::value` to test the unit represents a unitCategory quantity.*/\
    /** @tparam     T   one or more types to test*/\
    UNIT_ADD_IS_UNIT_CATEGORY_TRAIT(unitCategory)

Macro to create the is_category_unit type trait.

This trait allows users to test whether a given type matches an intended category. This macro comprises all the boiler-plate code necessary to do so.

Parameters

unitCategory

The name of the category of unit, e.g. length or mass.

UNIT_ADD_CATEGORY_TRAIT_DETAIL

#define UNIT_ADD_CATEGORY_TRAIT_DETAIL

(

unitCategory

)

Value:

    namespace traits\
    {\
        /** @cond */\
        namespace detail\
        {\
            template<typename T> struct is_ ## unitCategory ## _unit_impl : std::false_type {};\
            template<typename C, typename U, typename P, typename T>\
            struct is_ ## unitCategory ## _unit_impl<units::unit<C, U, P, T>> : std::is_same<units::traits::base_unit_of<typename units::traits::unit_traits<units::unit<C, U, P, T>>::base_unit_type>, units::category::unitCategory ## _unit>::type {};\
            template<typename U, typename S, template<typename> class N>\
            struct is_ ## unitCategory ## _unit_impl<units::unit_t<U, S, N>> : std::is_same<units::traits::base_unit_of<typename units::traits::unit_t_traits<units::unit_t<U, S, N>>::unit_type>, units::category::unitCategory ## _unit>::type {};\
        }\
        /** @endcond */\
    }

UNIT_ADD_CUSTOM_TYPE_UNIT_DEFINITION

#define UNIT_ADD_CUSTOM_TYPE_UNIT_DEFINITION	(		namespaceName,
			nameSingular,
			underlyingType
	)

Value:

    namespace namespaceName\
    {\
    /** @name Unit Containers */ /** @{ */ typedef unit_t<nameSingular,underlyingType> nameSingular ## _t; /** @} */\
    }

Macro for generating the boiler-plate code for a unit_t type definition with a non-default underlying type.

The macro generates the definition of the unit container types, e.g. meter_t

Parameters

namespaceName	namespace in which the new units will be encapsulated.
nameSingular	singular version of the unit name, e.g. 'meter'
underlyingType	the underlying type

UNIT_ADD_DECIBEL

#define UNIT_ADD_DECIBEL	(		namespaceName,
			nameSingular,
			abbreviation
	)

Value:

    namespace namespaceName\
    {\
        /** @name Unit Containers */ /** @{ */ typedef unit_t<nameSingular, UNIT_LIB_DEFAULT_TYPE, units::decibel_scale> abbreviation ## _t; /** @} */\
    }\
    UNIT_ADD_IO(namespaceName, abbreviation, abbreviation)\
    UNIT_ADD_LITERALS(namespaceName, abbreviation, abbreviation)

Macro to create decibel container and literals for an existing unit type.

This macro generates the decibel unit container, cout overload, and literal definitions.

Parameters

namespaceName	namespace in which the new units will be encapsulated. All literal values are placed in the units::literals namespace.
nameSingular	singular version of the base unit name, e.g. 'watt'
abbreviation	- abbreviated decibel unit name, e.g. 'dBW'

UNIT_ADD_IS_UNIT_CATEGORY_TRAIT

#define UNIT_ADD_IS_UNIT_CATEGORY_TRAIT

(

unitCategory

)

Value:

    namespace traits\
    {\
        template<typename... T> struct is_ ## unitCategory ## _unit : std::integral_constant<bool, units::all_true<units::traits::detail::is_ ## unitCategory ## _unit_impl<std::decay_t<T>>::value...>::value> {};\
        template<typename... T> inline constexpr bool is_ ## unitCategory ## _unit_v = is_ ## unitCategory ## _unit<T...>::value;\
    }\
    template <typename T>\
    concept unitCategory ## _unit = traits::is_ ## unitCategory ## _unit_v<T>;

UNIT_ADD_LITERALS

#define UNIT_ADD_LITERALS	(		namespaceName,
			nameSingular,
			abbreviation
	)

Value:

    namespace literals\
    {\
        inline constexpr namespaceName::nameSingular ## _t operator""_ ## abbreviation(long double d)\
        {\
            return namespaceName::nameSingular ## _t(static_cast<namespaceName::nameSingular ## _t::underlying_type>(d));\
        }\
        inline constexpr namespaceName::nameSingular ## _t operator""_ ## abbreviation (unsigned long long d)\
        {\
            return namespaceName::nameSingular ## _t(static_cast<namespaceName::nameSingular ## _t::underlying_type>(d));\
        }\
    }

Macro for generating user-defined literals for units.

The macro generates user-defined literals for units. A literal suffix is created using the abbreviation (e.g. 10.0_m).

Parameters

namespaceName	namespace in which the new units will be encapsulated. All literal values are placed in the units::literals namespace.
nameSingular	singular version of the unit name, e.g. 'meter'
abbreviation	- abbreviated unit name, e.g. 'm'

Note

When UNIT_HAS_LITERAL_SUPPORT is not defined, the macro does not generate any code

UNIT_ADD_NAME

#define UNIT_ADD_NAME	(		namespaceName,
			nameSingular,
			abbrev
	)

Value:

template<> inline constexpr const char* name(const namespaceName::nameSingular ## _t&)\
{\
    return #nameSingular;\
}\
template<> inline constexpr const char* abbreviation(const namespaceName::nameSingular ## _t&)\
{\
    return #abbrev;\
}

Macro for generating constexpr names/abbreviations for units.

The macro generates names for units. E.g. name() of 1_m would be "meter", and abbreviation would be "m".

Parameters

namespaceName	namespace in which the new units will be encapsulated. All literal values are placed in the units::literals namespace.
nameSingular	singular version of the unit name, e.g. 'meter'
abbreviation	- abbreviated unit name, e.g. 'm'

UNIT_ADD_UNIT_DEFINITION

#define UNIT_ADD_UNIT_DEFINITION	(		namespaceName,
			nameSingular
	)

Value:

    namespace namespaceName\
    {\
        /** @name Unit Containers */ /** @{ */ typedef unit_t<nameSingular> nameSingular ## _t; /** @} */\
    }

Macro for generating the boiler-plate code for the unit_t type definition.

The macro generates the definition of the unit container types, e.g. meter_t

Parameters

namespaceName	namespace in which the new units will be encapsulated.
nameSingular	singular version of the unit name, e.g. 'meter'

UNIT_ADD_UNIT_TAGS

#define UNIT_ADD_UNIT_TAGS	(		namespaceName,
			nameSingular,
			namePlural,
			abbreviation,
			...
	)

Value:

    namespace namespaceName\
    {\
    /** @name Units (full names plural) */ /** @{ */ typedef __VA_ARGS__ namePlural; /** @} */\
    /** @name Units (full names singular) */ /** @{ */ typedef namePlural nameSingular; /** @} */\
    /** @name Units (abbreviated) */ /** @{ */ typedef namePlural abbreviation; /** @} */\
    }

Helper macro for generating the boiler-plate code generating the tags of a new unit.

The macro generates singular, plural, and abbreviated forms of the unit definition (e.g. meter, meters, and m), as aliases for the unit tag.

Parameters

namespaceName	namespace in which the new units will be encapsulated.
nameSingular	singular version of the unit name, e.g. 'meter'
namePlural	- plural version of the unit name, e.g. 'meters'
abbreviation	- abbreviated unit name, e.g. 'm'
definition	- the variadic parameter is used for the definition of the unit (e.g. unit<std::ratio<1>, units::category::length_unit>)

Note

a variadic template is used for the definition to allow templates with commas to be easily expanded. All the variadic 'arguments' should together comprise the unit definition.

UNIT_ADD_WITH_CUSTOM_TYPE

#define UNIT_ADD_WITH_CUSTOM_TYPE	(		namespaceName,
			nameSingular,
			namePlural,
			abbreviation,
			underlyingType,
			...
	)

Value:

    UNIT_ADD_UNIT_TAGS(namespaceName,nameSingular, namePlural, abbreviation, __VA_ARGS__)\
    UNIT_ADD_CUSTOM_TYPE_UNIT_DEFINITION(namespaceName,nameSingular,underlyingType)\
    UNIT_ADD_IO(namespaceName,nameSingular, abbreviation)\
    UNIT_ADD_LITERALS(namespaceName,nameSingular, abbreviation)

Macro for generating the boiler-plate code needed for a new unit with a non-default underlying type.

The macro generates singular, plural, and abbreviated forms of the unit definition (e.g. meter, meters, and m), as well as the appropriately named unit container (e.g. meter_t). A literal suffix is created using the abbreviation (e.g. 10.0_m). It also defines a class-specific cout function which prints both the value and abbreviation of the unit when invoked.

Parameters

namespaceName	namespace in which the new units will be encapsulated. All literal values are placed in the units::literals namespace.
nameSingular	singular version of the unit name, e.g. 'meter'
namePlural	- plural version of the unit name, e.g. 'meters'
abbreviation	- abbreviated unit name, e.g. 'm'
underlyingType	- the underlying type, e.g. 'int' or 'float'
definition	- the variadic parameter is used for the definition of the unit (e.g. unit<std::ratio<1>, units::category::length_unit>)

Note

a variadic template is used for the definition to allow templates with commas to be easily expanded. All the variadic 'arguments' should together comprise the unit definition.

UNIT_ADD_WITH_METRIC_AND_BINARY_PREFIXES

#define UNIT_ADD_WITH_METRIC_AND_BINARY_PREFIXES	(		namespaceName,
			nameSingular,
			namePlural,
			abbreviation,
			...
	)

Value:

    UNIT_ADD_WITH_METRIC_PREFIXES(namespaceName, nameSingular, namePlural, abbreviation, __VA_ARGS__)\
    UNIT_ADD(namespaceName, kibi ## nameSingular, kibi ## namePlural, Ki ## abbreviation, kibi<namePlural>)\
    UNIT_ADD(namespaceName, mebi ## nameSingular, mebi ## namePlural, Mi ## abbreviation, mebi<namePlural>)\
    UNIT_ADD(namespaceName, gibi ## nameSingular, gibi ## namePlural, Gi ## abbreviation, gibi<namePlural>)\
    UNIT_ADD(namespaceName, tebi ## nameSingular, tebi ## namePlural, Ti ## abbreviation, tebi<namePlural>)\
    UNIT_ADD(namespaceName, pebi ## nameSingular, pebi ## namePlural, Pi ## abbreviation, pebi<namePlural>)\
    UNIT_ADD(namespaceName, exbi ## nameSingular, exbi ## namePlural, Ei ## abbreviation, exbi<namePlural>)

Macro for generating the boiler-plate code needed for a new unit, including its metric prefixes from femto to peta, and binary prefixes from kibi to exbi.

See UNIT_ADD. In addition to generating the unit definition and containers '(e.g. bytes and 'byte_t', it also creates corresponding units with metric suffixes such as millimeters, and millimeter_t), as well as the literal suffixes (e.g. 10.0_B).

Parameters

namespaceName	namespace in which the new units will be encapsulated. All literal values are placed in the units::literals namespace.
nameSingular	singular version of the unit name, e.g. 'byte'
namePlural	- plural version of the unit name, e.g. 'bytes'
abbreviation	- abbreviated unit name, e.g. 'B'
definition	- the variadic parameter is used for the definition of the unit (e.g. unit<std::ratio<1>, units::category::data_unit>)

Note

a variadic template is used for the definition to allow templates with commas to be easily expanded. All the variadic 'arguments' should together comprise the unit definition.

UNIT_ADD_WITH_METRIC_PREFIXES

#define UNIT_ADD_WITH_METRIC_PREFIXES	(		namespaceName,
			nameSingular,
			namePlural,
			abbreviation,
			...
	)

Value:

    UNIT_ADD(namespaceName, nameSingular, namePlural, abbreviation, __VA_ARGS__)\
    UNIT_ADD(namespaceName, femto ## nameSingular, femto ## namePlural, f ## abbreviation, femto<namePlural>)\
    UNIT_ADD(namespaceName, pico ## nameSingular, pico ## namePlural, p ## abbreviation, pico<namePlural>)\
    UNIT_ADD(namespaceName, nano ## nameSingular, nano ## namePlural, n ## abbreviation, nano<namePlural>)\
    UNIT_ADD(namespaceName, micro ## nameSingular, micro ## namePlural, u ## abbreviation, micro<namePlural>)\
    UNIT_ADD(namespaceName, milli ## nameSingular, milli ## namePlural, m ## abbreviation, milli<namePlural>)\
    UNIT_ADD(namespaceName, centi ## nameSingular, centi ## namePlural, c ## abbreviation, centi<namePlural>)\
    UNIT_ADD(namespaceName, deci ## nameSingular, deci ## namePlural, d ## abbreviation, deci<namePlural>)\
    UNIT_ADD(namespaceName, deca ## nameSingular, deca ## namePlural, da ## abbreviation, deca<namePlural>)\
    UNIT_ADD(namespaceName, hecto ## nameSingular, hecto ## namePlural, h ## abbreviation, hecto<namePlural>)\
    UNIT_ADD(namespaceName, kilo ## nameSingular, kilo ## namePlural, k ## abbreviation, kilo<namePlural>)\
    UNIT_ADD(namespaceName, mega ## nameSingular, mega ## namePlural, M ## abbreviation, mega<namePlural>)\
    UNIT_ADD(namespaceName, giga ## nameSingular, giga ## namePlural, G ## abbreviation, giga<namePlural>)\
    UNIT_ADD(namespaceName, tera ## nameSingular, tera ## namePlural, T ## abbreviation, tera<namePlural>)\
    UNIT_ADD(namespaceName, peta ## nameSingular, peta ## namePlural, P ## abbreviation, peta<namePlural>)\

Macro for generating the boiler-plate code needed for a new unit, including its metric prefixes from femto to peta.

See UNIT_ADD. In addition to generating the unit definition and containers '(e.g. meters and 'meter_t', it also creates corresponding units with metric suffixes such as millimeters, and millimeter_t), as well as the literal suffixes (e.g. 10.0_mm).

Parameters

namespaceName	namespace in which the new units will be encapsulated. All literal values are placed in the units::literals namespace.
nameSingular	singular version of the unit name, e.g. 'meter'
namePlural	- plural version of the unit name, e.g. 'meters'
abbreviation	- abbreviated unit name, e.g. 'm'
definition	- the variadic parameter is used for the definition of the unit (e.g. unit<std::ratio<1>, units::category::length_unit>)

Note

a variadic template is used for the definition to allow templates with commas to be easily expanded. All the variadic 'arguments' should together comprise the unit definition.

UNIT_HAS_LITERAL_SUPPORT

#define UNIT_HAS_LITERAL_SUPPORT

UNIT_LIB_DEFAULT_TYPE

#define UNIT_LIB_DEFAULT_TYPE   double