// Copyright (c) FIRST and other WPILib contributors.
// Open Source Software; you can modify and/or share it under the terms of
// the WPILib BSD license file in the root directory of this project.

package edu.wpi.first.wpilibj.simulation;

import edu.wpi.first.math.MathUtil;
import edu.wpi.first.math.Matrix;
import edu.wpi.first.math.VecBuilder;
import edu.wpi.first.math.numbers.N1;
import edu.wpi.first.math.numbers.N2;
import edu.wpi.first.math.system.LinearSystem;
import edu.wpi.first.math.system.NumericalIntegration;
import edu.wpi.first.math.system.plant.DCMotor;
import edu.wpi.first.math.system.plant.LinearSystemId;
import edu.wpi.first.wpilibj.RobotController;

/** Represents a simulated single jointed arm mechanism. */
public class SingleJointedArmSim extends LinearSystemSim<N2, N1, N2> {
  // The gearbox for the arm.
  private final DCMotor m_gearbox;

  // The gearing between the motors and the output.
  private final double m_gearing;

  // The length of the arm.
  private final double m_armLenMeters;

  // The minimum angle that the arm is capable of.
  private final double m_minAngle;

  // The maximum angle that the arm is capable of.
  private final double m_maxAngle;

  // Whether the simulator should simulate gravity.
  private final boolean m_simulateGravity;

  /**
   * Creates a simulated arm mechanism.
   *
   * @param plant The linear system that represents the arm. This system can be created with {@link
   *     edu.wpi.first.math.system.plant.LinearSystemId#createSingleJointedArmSystem(DCMotor,
   *     double, double)}.
   * @param gearbox The type of and number of motors in the arm gearbox.
   * @param gearing The gearing of the arm (numbers greater than 1 represent reductions).
   * @param armLengthMeters The length of the arm.
   * @param minAngleRads The minimum angle that the arm is capable of.
   * @param maxAngleRads The maximum angle that the arm is capable of.
   * @param simulateGravity Whether gravity should be simulated or not.
   * @param startingAngleRads The initial position of the Arm simulation in radians.
   * @param measurementStdDevs The standard deviations of the measurements. Can be omitted if no
   *     noise is desired. If present must have 1 element for position.
   */
  @SuppressWarnings("this-escape")
  public SingleJointedArmSim(
      LinearSystem<N2, N1, N2> plant,
      DCMotor gearbox,
      double gearing,
      double armLengthMeters,
      double minAngleRads,
      double maxAngleRads,
      boolean simulateGravity,
      double startingAngleRads,
      double... measurementStdDevs) {
    super(plant, measurementStdDevs);
    m_gearbox = gearbox;
    m_gearing = gearing;
    m_armLenMeters = armLengthMeters;
    m_minAngle = minAngleRads;
    m_maxAngle = maxAngleRads;
    m_simulateGravity = simulateGravity;

    setState(startingAngleRads, 0.0);
  }

  /**
   * Creates a simulated arm mechanism.
   *
   * @param gearbox The type of and number of motors in the arm gearbox.
   * @param gearing The gearing of the arm (numbers greater than 1 represent reductions).
   * @param jKgMetersSquared The moment of inertia of the arm; can be calculated from CAD software.
   * @param armLengthMeters The length of the arm.
   * @param minAngleRads The minimum angle that the arm is capable of.
   * @param maxAngleRads The maximum angle that the arm is capable of.
   * @param simulateGravity Whether gravity should be simulated or not.
   * @param startingAngleRads The initial position of the Arm simulation in radians.
   * @param measurementStdDevs The standard deviations of the measurements. Can be omitted if no
   *     noise is desired. If present must have 1 element for position.
   */
  public SingleJointedArmSim(
      DCMotor gearbox,
      double gearing,
      double jKgMetersSquared,
      double armLengthMeters,
      double minAngleRads,
      double maxAngleRads,
      boolean simulateGravity,
      double startingAngleRads,
      double... measurementStdDevs) {
    this(
        LinearSystemId.createSingleJointedArmSystem(gearbox, jKgMetersSquared, gearing),
        gearbox,
        gearing,
        armLengthMeters,
        minAngleRads,
        maxAngleRads,
        simulateGravity,
        startingAngleRads,
        measurementStdDevs);
  }

  /**
   * Sets the arm's state. The new angle will be limited between the minimum and maximum allowed
   * limits.
   *
   * @param angleRadians The new angle in radians.
   * @param velocityRadPerSec The new angular velocity in radians per second.
   */
  public final void setState(double angleRadians, double velocityRadPerSec) {
    setState(
        VecBuilder.fill(MathUtil.clamp(angleRadians, m_minAngle, m_maxAngle), velocityRadPerSec));
  }

  /**
   * Returns whether the arm would hit the lower limit.
   *
   * @param currentAngleRads The current arm height.
   * @return Whether the arm would hit the lower limit.
   */
  public boolean wouldHitLowerLimit(double currentAngleRads) {
    return currentAngleRads <= this.m_minAngle;
  }

  /**
   * Returns whether the arm would hit the upper limit.
   *
   * @param currentAngleRads The current arm height.
   * @return Whether the arm would hit the upper limit.
   */
  public boolean wouldHitUpperLimit(double currentAngleRads) {
    return currentAngleRads >= this.m_maxAngle;
  }

  /**
   * Returns whether the arm has hit the lower limit.
   *
   * @return Whether the arm has hit the lower limit.
   */
  public boolean hasHitLowerLimit() {
    return wouldHitLowerLimit(getAngleRads());
  }

  /**
   * Returns whether the arm has hit the upper limit.
   *
   * @return Whether the arm has hit the upper limit.
   */
  public boolean hasHitUpperLimit() {
    return wouldHitUpperLimit(getAngleRads());
  }

  /**
   * Returns the current arm angle.
   *
   * @return The current arm angle.
   */
  public double getAngleRads() {
    return getOutput(0);
  }

  /**
   * Returns the current arm velocity.
   *
   * @return The current arm velocity.
   */
  public double getVelocityRadPerSec() {
    return getOutput(1);
  }

  /**
   * Returns the arm current draw.
   *
   * @return The aram current draw.
   */
  public double getCurrentDrawAmps() {
    // Reductions are greater than 1, so a reduction of 10:1 would mean the motor is
    // spinning 10x faster than the output
    var motorVelocity = m_x.get(1, 0) * m_gearing;
    return m_gearbox.getCurrent(motorVelocity, m_u.get(0, 0)) * Math.signum(m_u.get(0, 0));
  }

  /**
   * Sets the input voltage for the arm.
   *
   * @param volts The input voltage.
   */
  public void setInputVoltage(double volts) {
    setInput(volts);
    clampInput(RobotController.getBatteryVoltage());
  }

  /**
   * Calculates a rough estimate of the moment of inertia of an arm given its length and mass.
   *
   * @param lengthMeters The length of the arm.
   * @param massKg The mass of the arm.
   * @return The calculated moment of inertia.
   */
  public static double estimateMOI(double lengthMeters, double massKg) {
    return 1.0 / 3.0 * massKg * lengthMeters * lengthMeters;
  }

  /**
   * Updates the state of the arm.
   *
   * @param currentXhat The current state estimate.
   * @param u The system inputs (voltage).
   * @param dtSeconds The time difference between controller updates.
   */
  @Override
  protected Matrix<N2, N1> updateX(Matrix<N2, N1> currentXhat, Matrix<N1, N1> u, double dtSeconds) {
    // The torque on the arm is given by τ = F⋅r, where F is the force applied by
    // gravity and r the distance from pivot to center of mass. Recall from
    // dynamics that the sum of torques for a rigid body is τ = J⋅α, were τ is
    // torque on the arm, J is the mass-moment of inertia about the pivot axis,
    // and α is the angular acceleration in rad/s². Rearranging yields: α = F⋅r/J
    //
    // We substitute in F = m⋅g⋅cos(θ), where θ is the angle from horizontal:
    //
    //   α = (m⋅g⋅cos(θ))⋅r/J
    //
    // Multiply RHS by cos(θ) to account for the arm angle. Further, we know the
    // arm mass-moment of inertia J of our arm is given by J=1/3 mL², modeled as a
    // rod rotating about it's end, where L is the overall rod length. The mass
    // distribution is assumed to be uniform. Substitute r=L/2 to find:
    //
    //   α = (m⋅g⋅cos(θ))⋅r/(1/3 mL²)
    //   α = (m⋅g⋅cos(θ))⋅(L/2)/(1/3 mL²)
    //   α = 3/2⋅g⋅cos(θ)/L
    //
    // This acceleration is next added to the linear system dynamics ẋ=Ax+Bu
    //
    //   f(x, u) = Ax + Bu + [0  α]ᵀ
    //   f(x, u) = Ax + Bu + [0  3/2⋅g⋅cos(θ)/L]ᵀ

    Matrix<N2, N1> updatedXhat =
        NumericalIntegration.rkdp(
            (Matrix<N2, N1> x, Matrix<N1, N1> _u) -> {
              Matrix<N2, N1> xdot = m_plant.getA().times(x).plus(m_plant.getB().times(_u));
              if (m_simulateGravity) {
                double alphaGrav = 3.0 / 2.0 * -9.8 * Math.cos(x.get(0, 0)) / m_armLenMeters;
                xdot = xdot.plus(VecBuilder.fill(0, alphaGrav));
              }
              return xdot;
            },
            currentXhat,
            u,
            dtSeconds);

    // We check for collision after updating xhat
    if (wouldHitLowerLimit(updatedXhat.get(0, 0))) {
      return VecBuilder.fill(m_minAngle, 0);
    }
    if (wouldHitUpperLimit(updatedXhat.get(0, 0))) {
      return VecBuilder.fill(m_maxAngle, 0);
    }
    return updatedXhat;
  }
}