001// Copyright (c) FIRST and other WPILib contributors.
002// Open Source Software; you can modify and/or share it under the terms of
003// the WPILib BSD license file in the root directory of this project.
004
005package edu.wpi.first.hal;
006
007/**
008 * Analog Gyro JNI Functions.
009 *
010 * @see "hal/AnalogGyro.h"
011 */
012public class AnalogGyroJNI extends JNIWrapper {
013  /**
014   * Initializes an analog gyro.
015   *
016   * @param halAnalogInputHandle handle to the analog input port
017   * @return the initialized gyro handle
018   * @see "HAL_InitializeAnalogGyro"
019   */
020  public static native int initializeAnalogGyro(int halAnalogInputHandle);
021
022  /**
023   * Sets up an analog gyro with the proper offsets and settings for the KOP analog gyro.
024   *
025   * @param handle the gyro handle
026   * @see "HAL_SetupAnalogGyro"
027   */
028  public static native void setupAnalogGyro(int handle);
029
030  /**
031   * Frees an analog gyro.
032   *
033   * @param handle the gyro handle
034   * @see "HAL_FreeAnalogGyro"
035   */
036  public static native void freeAnalogGyro(int handle);
037
038  /**
039   * Sets the analog gyro parameters to the specified values.
040   *
041   * <p>This is meant to be used if you want to reuse the values from a previous calibration.
042   *
043   * @param handle the gyro handle
044   * @param voltsPerDegreePerSecond the gyro volts scaling
045   * @param offset the gyro offset
046   * @param center the gyro center
047   * @see "HAL_SetAnalogGyroParameters"
048   */
049  public static native void setAnalogGyroParameters(
050      int handle, double voltsPerDegreePerSecond, double offset, int center);
051
052  /**
053   * Sets the analog gyro volts per degrees per second scaling.
054   *
055   * @param handle the gyro handle
056   * @param voltsPerDegreePerSecond the gyro volts scaling
057   * @see "HAL_SetAnalogGyroVoltsPerDegreePerSecond"
058   */
059  public static native void setAnalogGyroVoltsPerDegreePerSecond(
060      int handle, double voltsPerDegreePerSecond);
061
062  /**
063   * Resets the analog gyro value to 0.
064   *
065   * @param handle the gyro handle
066   * @see "HAL_ResetAnalogGyro"
067   */
068  public static native void resetAnalogGyro(int handle);
069
070  /**
071   * Calibrates the analog gyro.
072   *
073   * <p>This happens by calculating the average value of the gyro over 5 seconds, and setting that
074   * as the center. Note that this call blocks for 5 seconds to perform this.
075   *
076   * @param handle the gyro handle
077   * @see "HAL_CalibrateAnalogGyro"
078   */
079  public static native void calibrateAnalogGyro(int handle);
080
081  /**
082   * Sets the deadband of the analog gyro.
083   *
084   * @param handle the gyro handle
085   * @param volts the voltage deadband
086   * @see "HAL_SetAnalogGyroDeadband"
087   */
088  public static native void setAnalogGyroDeadband(int handle, double volts);
089
090  /**
091   * Gets the gyro angle in degrees.
092   *
093   * @param handle the gyro handle
094   * @return the gyro angle in degrees
095   * @see "HAL_GetAnalogGyroAngle"
096   */
097  public static native double getAnalogGyroAngle(int handle);
098
099  /**
100   * Gets the gyro rate in degrees/second.
101   *
102   * @param handle the gyro handle
103   * @return the gyro rate in degrees/second
104   * @see "HAL_GetAnalogGyroRate"
105   */
106  public static native double getAnalogGyroRate(int handle);
107
108  /**
109   * Gets the calibrated gyro offset.
110   *
111   * <p>Can be used to not repeat a calibration but reconstruct the gyro object.
112   *
113   * @param handle the gyro handle
114   * @return the gryo offset
115   * @see "HAL_GetAnalogGyroOffset"
116   */
117  public static native double getAnalogGyroOffset(int handle);
118
119  /**
120   * Gets the calibrated gyro center.
121   *
122   * <p>Can be used to not repeat a calibration but reconstruct the gyro object.
123   *
124   * @param handle the gyro handle
125   * @return the gyro center
126   * @see "HAL_GetAnalogGyroCenter"
127   */
128  public static native int getAnalogGyroCenter(int handle);
129}