Error Defines

Macros
#define	HAL_ERR_CANSessionMux_InvalidBuffer_MESSAGE   "CAN: Invalid Buffer"
#define	HAL_ERR_CANSessionMux_MessageNotFound_MESSAGE   "CAN: Message not found"
#define	HAL_WARN_CANSessionMux_NoToken_MESSAGE   "CAN: No token"
#define	HAL_ERR_CANSessionMux_NotAllowed_MESSAGE   "CAN: Not allowed"
#define	HAL_ERR_CANSessionMux_NotInitialized_MESSAGE   "CAN: Not initialized"
#define	HAL_WARN_CANSessionMux_TxQueueFull_MESSAGE    "CAN: TX Queue full. Generally caused by a disconnected bus."
#define	HAL_WARN_CANSessionMux_SocketBufferFull_MESSAGE    "CAN: Socket Buffer full. Generally caused by sending too many packets."
#define	HAL_SUCCESS   0
#define	HAL_VOLTAGE_OUT_OF_RANGE   1002
#define	HAL_VOLTAGE_OUT_OF_RANGE_MESSAGE    "HAL: Voltage to convert to raw value is out of range [0; 5]"
#define	HAL_INCOMPATIBLE_STATE   1015
#define	HAL_INCOMPATIBLE_STATE_MESSAGE    "HAL: Incompatible State: The operation cannot be completed"
#define	HAL_NO_AVAILABLE_RESOURCES   -1004
#define	HAL_NO_AVAILABLE_RESOURCES_MESSAGE    "HAL: No available resources to allocate"
#define	HAL_NULL_PARAMETER   -1005
#define	HAL_NULL_PARAMETER_MESSAGE    "HAL: A pointer parameter to a method is NULL"
#define	HAL_PARAMETER_OUT_OF_RANGE   -1028
#define	HAL_PARAMETER_OUT_OF_RANGE_MESSAGE   "HAL: A parameter is out of range."
#define	HAL_RESOURCE_IS_ALLOCATED   -1029
#define	HAL_RESOURCE_IS_ALLOCATED_MESSAGE   "HAL: Resource already allocated"
#define	HAL_RESOURCE_OUT_OF_RANGE   -1030
#define	HAL_RESOURCE_OUT_OF_RANGE_MESSAGE    "HAL: The requested resource is out of range."
#define	HAL_COUNTER_NOT_SUPPORTED   -1058
#define	HAL_COUNTER_NOT_SUPPORTED_MESSAGE    "HAL: Counter mode not supported for encoder method"
#define	HAL_HANDLE_ERROR   -1098
#define	HAL_HANDLE_ERROR_MESSAGE    "HAL: A handle parameter was passed incorrectly"
#define	HAL_SERIAL_PORT_NOT_FOUND   -1123
#define	HAL_SERIAL_PORT_NOT_FOUND_MESSAGE    "HAL: The specified serial port device was not found"
#define	HAL_SERIAL_PORT_OPEN_ERROR   -1124
#define	HAL_SERIAL_PORT_OPEN_ERROR_MESSAGE    "HAL: The serial port could not be opened"
#define	HAL_SERIAL_PORT_ERROR   -1125
#define	HAL_SERIAL_PORT_ERROR_MESSAGE    "HAL: There was an error on the serial port"
#define	HAL_THREAD_PRIORITY_ERROR   -1152
#define	HAL_THREAD_PRIORITY_ERROR_MESSAGE    "HAL: Getting or setting the priority of a thread has failed"
#define	HAL_THREAD_PRIORITY_RANGE_ERROR   -1153
#define	HAL_THREAD_PRIORITY_RANGE_ERROR_MESSAGE    "HAL: The priority requested to be set is invalid"
#define	HAL_CAN_TIMEOUT   -1154
#define	HAL_CAN_TIMEOUT_MESSAGE   "HAL: CAN Receive has Timed Out"
#define	HAL_SIM_NOT_SUPPORTED   -1155
#define	HAL_SIM_NOT_SUPPORTED_MESSAGE   "HAL: Method not supported in sim"
#define	HAL_USE_LAST_ERROR   -1156
#define	HAL_USE_LAST_ERROR_MESSAGE    "HAL: Use HAL_GetLastError(status) to get last error"
#define	HAL_CAN_BUFFER_OVERRUN   -35007
#define	HAL_CAN_BUFFER_OVERRUN_MESSAGE    "HAL: CAN Output Buffer Full. Ensure a device is attached"

Detailed Description

Macro Definition Documentation

HAL_CAN_BUFFER_OVERRUN

#define HAL_CAN_BUFFER_OVERRUN   -35007

HAL_CAN_BUFFER_OVERRUN_MESSAGE

#define HAL_CAN_BUFFER_OVERRUN_MESSAGE    "HAL: CAN Output Buffer Full. Ensure a device is attached"

HAL_CAN_TIMEOUT

#define HAL_CAN_TIMEOUT   -1154

HAL_CAN_TIMEOUT_MESSAGE

#define HAL_CAN_TIMEOUT_MESSAGE   "HAL: CAN Receive has Timed Out"

HAL_COUNTER_NOT_SUPPORTED

#define HAL_COUNTER_NOT_SUPPORTED   -1058

HAL_COUNTER_NOT_SUPPORTED_MESSAGE

#define HAL_COUNTER_NOT_SUPPORTED_MESSAGE    "HAL: Counter mode not supported for encoder method"

HAL_ERR_CANSessionMux_InvalidBuffer_MESSAGE

#define HAL_ERR_CANSessionMux_InvalidBuffer_MESSAGE   "CAN: Invalid Buffer"

HAL_ERR_CANSessionMux_MessageNotFound_MESSAGE

#define HAL_ERR_CANSessionMux_MessageNotFound_MESSAGE   "CAN: Message not found"

HAL_ERR_CANSessionMux_NotAllowed_MESSAGE

#define HAL_ERR_CANSessionMux_NotAllowed_MESSAGE   "CAN: Not allowed"

HAL_ERR_CANSessionMux_NotInitialized_MESSAGE

#define HAL_ERR_CANSessionMux_NotInitialized_MESSAGE   "CAN: Not initialized"

HAL_HANDLE_ERROR

#define HAL_HANDLE_ERROR   -1098

HAL_HANDLE_ERROR_MESSAGE

#define HAL_HANDLE_ERROR_MESSAGE    "HAL: A handle parameter was passed incorrectly"

HAL_INCOMPATIBLE_STATE

#define HAL_INCOMPATIBLE_STATE   1015

HAL_INCOMPATIBLE_STATE_MESSAGE

#define HAL_INCOMPATIBLE_STATE_MESSAGE    "HAL: Incompatible State: The operation cannot be completed"

HAL_NO_AVAILABLE_RESOURCES

#define HAL_NO_AVAILABLE_RESOURCES   -1004

HAL_NO_AVAILABLE_RESOURCES_MESSAGE

#define HAL_NO_AVAILABLE_RESOURCES_MESSAGE    "HAL: No available resources to allocate"

HAL_NULL_PARAMETER

#define HAL_NULL_PARAMETER   -1005

HAL_NULL_PARAMETER_MESSAGE

#define HAL_NULL_PARAMETER_MESSAGE    "HAL: A pointer parameter to a method is NULL"

HAL_PARAMETER_OUT_OF_RANGE

#define HAL_PARAMETER_OUT_OF_RANGE   -1028

HAL_PARAMETER_OUT_OF_RANGE_MESSAGE

#define HAL_PARAMETER_OUT_OF_RANGE_MESSAGE   "HAL: A parameter is out of range."

HAL_RESOURCE_IS_ALLOCATED

#define HAL_RESOURCE_IS_ALLOCATED   -1029

HAL_RESOURCE_IS_ALLOCATED_MESSAGE

#define HAL_RESOURCE_IS_ALLOCATED_MESSAGE   "HAL: Resource already allocated"

HAL_RESOURCE_OUT_OF_RANGE

#define HAL_RESOURCE_OUT_OF_RANGE   -1030

HAL_RESOURCE_OUT_OF_RANGE_MESSAGE

#define HAL_RESOURCE_OUT_OF_RANGE_MESSAGE    "HAL: The requested resource is out of range."

HAL_SERIAL_PORT_ERROR

#define HAL_SERIAL_PORT_ERROR   -1125

HAL_SERIAL_PORT_ERROR_MESSAGE

#define HAL_SERIAL_PORT_ERROR_MESSAGE    "HAL: There was an error on the serial port"

HAL_SERIAL_PORT_NOT_FOUND

#define HAL_SERIAL_PORT_NOT_FOUND   -1123

HAL_SERIAL_PORT_NOT_FOUND_MESSAGE

#define HAL_SERIAL_PORT_NOT_FOUND_MESSAGE    "HAL: The specified serial port device was not found"

HAL_SERIAL_PORT_OPEN_ERROR

#define HAL_SERIAL_PORT_OPEN_ERROR   -1124

HAL_SERIAL_PORT_OPEN_ERROR_MESSAGE

#define HAL_SERIAL_PORT_OPEN_ERROR_MESSAGE    "HAL: The serial port could not be opened"

HAL_SIM_NOT_SUPPORTED

#define HAL_SIM_NOT_SUPPORTED   -1155

HAL_SIM_NOT_SUPPORTED_MESSAGE

#define HAL_SIM_NOT_SUPPORTED_MESSAGE   "HAL: Method not supported in sim"

HAL_SUCCESS

#define HAL_SUCCESS   0

HAL_THREAD_PRIORITY_ERROR

#define HAL_THREAD_PRIORITY_ERROR   -1152

HAL_THREAD_PRIORITY_ERROR_MESSAGE

#define HAL_THREAD_PRIORITY_ERROR_MESSAGE    "HAL: Getting or setting the priority of a thread has failed"

HAL_THREAD_PRIORITY_RANGE_ERROR

#define HAL_THREAD_PRIORITY_RANGE_ERROR   -1153

HAL_THREAD_PRIORITY_RANGE_ERROR_MESSAGE

#define HAL_THREAD_PRIORITY_RANGE_ERROR_MESSAGE    "HAL: The priority requested to be set is invalid"

HAL_USE_LAST_ERROR

#define HAL_USE_LAST_ERROR   -1156

HAL_USE_LAST_ERROR_MESSAGE

#define HAL_USE_LAST_ERROR_MESSAGE    "HAL: Use HAL_GetLastError(status) to get last error"

HAL_VOLTAGE_OUT_OF_RANGE

#define HAL_VOLTAGE_OUT_OF_RANGE   1002

HAL_VOLTAGE_OUT_OF_RANGE_MESSAGE

#define HAL_VOLTAGE_OUT_OF_RANGE_MESSAGE    "HAL: Voltage to convert to raw value is out of range [0; 5]"

HAL_WARN_CANSessionMux_NoToken_MESSAGE

#define HAL_WARN_CANSessionMux_NoToken_MESSAGE   "CAN: No token"

HAL_WARN_CANSessionMux_SocketBufferFull_MESSAGE

#define HAL_WARN_CANSessionMux_SocketBufferFull_MESSAGE    "CAN: Socket Buffer full. Generally caused by sending too many packets."

HAL_WARN_CANSessionMux_TxQueueFull_MESSAGE

#define HAL_WARN_CANSessionMux_TxQueueFull_MESSAGE    "CAN: TX Queue full. Generally caused by a disconnected bus."